Suspension
|
|
|
| 1" Wheel Outer - BBS Motorsports - New | 2.5" Wheel Outer - BBS Motorsports - NEW | 8" Wheel Inner - BBS Motorsports - New |
1" Wide BBW Motorsports Wheel Outer 18" 24 Bolt | 2.5" Wide BBW Motorsports Wheel Outer 18" 24 Bolt | 8" Wide BBW Motorsports Wheel Inner 18" 24 Bolt
|
$260.00 | $260.00 | $430.00 |
|
|
|
| 8.5" Wheel Inner - BBS Motorsports - NEW | 996/997 GT3 Lower Control Arm Shims | BBS Motorsports Wheel Bolts and Washers - 24 pc set |
8.5" Wide BBW Motorsports Wheel Inner 18" 24 Bolt
| Assorted widths of alignment shims to be used with the GT3 style control arms. | 996 or 997 cup 24 bolt wheel hardware |
$490.00 | $8.00 | $21.95 |
|
|
|
| BBS Motorsports Wheel Seal O-Ring | Center Bolt C Clip Porsche GT3 Cup 964-997.2 | Control Arm Monoballs - Porsche 996/997 |
996 or 997 cup 24 bolt wheel sealing ring | C-Clip for Center Bolt on 964 - 997.2 Cup center lock hub. Porsche Motorsports part number 900.041.041.01 | Control Arm Monoballs made from Aircraft grade aluminum with aerospce monoballs and stainless steel bushings.
|
$31.00 | $4.00 | $240.00 |
|
|
|
| Demon Speed Rod End Boot | Double Height Jack Stands GT3 Cup - Aluminum | Front Adjustable Toe Links | 996/997/986/987 | Non-Pinch Style |
Rod end boots to protect rod ends from dirt and moisture | Aluminum jack stands. Double height. | Front Adjustable Toe Links. Made from Aircraft Grade Aluminum, 3-piece precision Rod Ends with PTFE liners. |
$5.90 | $1,650.00 | $374.00 |
|
|
|
| Front Adjustable Toe Links | Porsche 996/997/986/987/718/981 | Hirschmann Rod Ends SMXCP Male Metric Sizes | LCA Rubber End GT3 Style Control Arm Inner Section |
Motorsports pinch style toe links | Factory Porsche Rod Ends in various Sizes. | Inner contol arm section for Porsche GT3. This can also be used along with the Control Arm outer section to replace the one piece arms found on many Porsches. |
$515.00 | $78.00 | $180.00 |
|
|
|
| LCA Rubber End GT3 Style Control Arm Inner Section | Long | LCA Rubber End GT3 Style Control Arm Inner Section | Tarett | Locking Plates - Rear Toe - Porsche 986/987, 996/997 and 981 |
Inner contol arm section for Porsche GT3. This can also be used along with the Control Arm outer section to replace the one piece arms found on many Porsches. | Inner contol arm section for Porsche GT3. This can also be used along with the Control Arm outer section to replace the one piece arms found on many Porsches. | Replaces ecentric screw to avoid camber misalignment from use. |
$190.00 | $195.00 | $86.00 |
|
|
|
| Lower Control Arm | Lower Control Arm Outer Section | Updated | Forged | Factory | Porsche GT3 Cup 964 993 996 and 997 Centerlock wheels Lock Pot |
Lower Control Arms | Outer contol arm section for Porsche GT3. This can also be used along with the Control Arm inner section to replace the one piece arms found on many Porsches. | Lock Pot for the center of the wheel hub for use with centerlock wheels. This part is for the 964 993 996 and the 997 Cup. Replaces 964.341.675.70 |
$126.50 | $927.00 | $161.00 |
|
|
|
| Porsche GT3 Cup Long Distance Sleeves | Porsche GT3 Cup Small Distance Sleeves | Rear Adjustable Toe Links 986 / 996 / 987 / 997 |
Long Distance Sleeve. Replacement for part number 997.331.575.9A Item 33 | Small Distance Sleeve. Replacement for part number 997.331.573.9A Item 34 | Motorsports pinch style toe links |
$15.00 | $10.00 | $565.00 |
|
|
|
| Rear Adjustable Toe Links - Porsche GT3 Cup 997.1 | Rear Sway Bar Cockpit Adjustable Controller Kit - Porsche 997 | Shock Adjusting Hook Tool |
Rear Adjustable Toe Links. Made from Aircraft Grade Aluminum, 3-piece precision Rod Ends with PTFE liners. | This kit is made for the 997 Cup Car. | PMNA tool for adjusting the shock collars for 996 and 997 996.450.633.90 |
$166.00 | $945.00 | $323.81 |
|
|
|
| Shock Adjusting Hook Wrench Tool | 75mm and 65mm | Pair | Solid Rear Subframe Bushings - Porsche 996/997 | Thrust Bushings - Adjustable Porsche GT3 |
DSM tool for adjusting the shock collars for 996, 997 and 991 Cup Cars These are the tools needed to adjust the collars of the Sachs shocks. The OD of the collars that these are made to adjust are 65mm and 75mm. The tools are made from stainless steel. | CNC Machined from 2024 aluminum and stainless steel. Full kit of 12 pcs. Lowers suspension by 12mm | Aluminum Billet Thrust Bushing for control arms. Specify 996 or 997 |
$100.00 | $332.00 | $115.00 |
| ||
| Rear Adjustable Upper Control Arms Porsche 996/997 Dog Bones | ||
Rear upper Adjustable Links - Dog Bones Made from Aircraft Grade Aluminum, 3-piece precision Rod Ends with PTFE liners. | ||
$790.00 | ||
