Suspension

 
Center Bolt C Clip Porsche GT3 Cup 996 and 997 Cup Control Arm Bearing Journal Pin Bolt | Porsche 911 RSR Control Arm Bearing Journal Pin | Porsche 911 RSR
Center Bolt C Clip Porsche GT3 Cup 996 and 997 CupControl Arm Bearing Journal Pin Bolt | Porsche 911 RSRControl Arm Bearing Journal Pin | Porsche 911 RSR

 C-Clip for Center Bolt on 996 - 997.2 Cup center lock hub.

Porsche Motorsports part number 964.361.677.80

Replaceable pin to be used with the Porsche Motorsports RSR Control arms.  76mm length

Replaceable pin to be used with the Porsche Motorsports RSR Control arms.  76mm length

$4.00

$74.00

$293.00

Control Arm Monoballs - Porsche 996/997 Control Arm Outer Section Control Arm Outer Section | Porsche 911 RSR
Control Arm Monoballs - Porsche 996/997Control Arm Outer SectionControl Arm Outer Section | Porsche 911 RSR

Control Arm Monoballs made from Aircraft grade aluminum with aerospce monoballs and stainless steel bushings. 

 

Outer contol arm section for Porsche GT3.  This can also be used along with the Control Arm inner section to replace the one piece arms found on many Porsches.

Outer contol arm section for Porsche RSR.  This can also be used along with the Control Arm inner section to replace the one piece arms found on many Porsches.

$225.00

$297.00

$535.70

Control Arm | Porsche 911 RSR Double Height Jack Stands GT3 Cup - Aluminum Female rod end
Control Arm | Porsche 911 RSRDouble Height Jack Stands GT3 Cup - AluminumFemale rod end

Outer contol arm for Porsche RSR.  This can also be used to replace the one piece arms found on many Porsches.

Aluminum jack stands.  Double height.

 

$995.00

$1,499.00

$20.00

H&R 60mm ID x 100mm Long Springs - Coil Over Hirschmann Rod Ends | SMXCP | Male Metric Sizes Performance Engine Mounts - Torque Solutions - Porsche 996/997
H&R 60mm ID x 100mm Long Springs - Coil OverHirschmann Rod Ends | SMXCP | Male Metric SizesPerformance Engine Mounts - Torque Solutions - Porsche 996/997

60mm Diameter 100mm Long - Spring for the Cup Sachs Shocks Specify Spring Rate in Notes Section

 

Factory Porsche Rod Ends in various Sizes.

With Torque Solution engine mounts you will see and feel a difference in your vehicle. These mounts are made out of high grade billet aluminum material and steel. You can rest assure that with our superior material and design you will get optimal...

$97.42

$78.00

$399.00

Porsche GT3 Cup 964 993 996 and 997 Centerlock wheels Lock Pot Porsche RSR / Cup S Trailing Arm Assembly - Used Rear Adjustable Toe Links - Porsche 996/997/986/987
Porsche GT3 Cup 964 993 996 and 997 Centerlock wheels Lock PotPorsche RSR / Cup S Trailing Arm Assembly - UsedRear Adjustable Toe Links - Porsche 996/997/986/987

Lock Pot for the center of the wheel hub for use with centerlock wheels. This part is for the 964 993 996 and the 997 Cup. Replaces 964.341.675.70

Obtain full adjustablity of your suspension with this factory trailing arm assembly.

This will fit the front or rear of any 996 or 997 Cup or street car.  Front or Rear.

These are used, but in very good condition.

Rear Adjustable Toe Links. Made from Aircraft Grade Aluminum, 3-piece precision Rod Ends with PTFE liners.

$139.95

$320.00

$490.00

Rear Adjustable Toe Links | 986 / 996 / 987 / 997 Rear Motorsports 997.2 Track Rod | 997.331.231.9B - Used Thrust Bushings - Adjustable Porsche GT3
Rear Adjustable Toe Links | 986 / 996 / 987 / 997 Rear Motorsports 997.2 Track Rod | 997.331.231.9B - UsedThrust Bushings - Adjustable Porsche GT3

Motorsports pinch style toe links

Pinch style tie rod to provide rear adjuastable toe.

 Aluminum Billet Thrust Bushing for control arms.

Specify 996 or 997

$490.00

$125.00

$95.00

Front Adjustable Toe Links - Porsche 996 / 997 / 986 / 987 / 718 Rear Adjustable Upper Control Arms Porsche 996/997 Dog Bones Locking Plates - Rear Toe - Porsche 993, 996, and 997
Front Adjustable Toe Links - Porsche 996 / 997 / 986 / 987 / 718Rear Adjustable Upper Control Arms Porsche 996/997 Dog BonesLocking Plates - Rear Toe - Porsche 993, 996, and 997

Motorsports pinch style toe links

Rear upper Adjustable Links - Dog Bones Made from Aircraft Grade Aluminum, 3-piece precision Rod Ends with PTFE liners.

Replaces ecentric screw to avoid camber misalignment from use.

$445.00

$690.00

$75.00

alignment shims Sach's Shock Valves - Replacement - Porsche GT3 Cup 996 H&R 60mm ID x 120mm Long Springs - Coil Over
alignment shimsSach's Shock Valves - Replacement - Porsche GT3 Cup 996H&R 60mm ID x 120mm Long Springs - Coil Over

Assorted widths of alignmet shims to be used with the GT3 style control arms.

Sach's Shock filler valves - The stock Sachs gas valaves on the end of the remove reservoir are made so that you can not fill, check, or adjust the gas pressure in the shocks. The solution to this has been to install a long adaptor to the shock...

60mm Diameter 120mm Long - Spring for the Cup Sachs Shocks Specify Spring Rate in Notes Section

Note factory springs are 130mm long but no longer available  

$5.00

$135.00

$97.42