Fittings / Misc
|
|
|
| BBS Motorsports Wheel Bolts and Washers - 24 pc set | BBS Motorsports Wheel Seal O-Ring | CV Bolts Porsche 911 |
996 or 997 cup 24 bolt wheel hardware | 996 or 997 cup 24 bolt wheel sealing ring | 6-Pack of CV Axle Inner Bolts - One Axle Fits: 996/997 GT3 Cup & Street Carry spares & replace them when changing axles! |
$21.95 | $31.00 | $12.00 |
|
|
|
| Dash and Center Switch Panel - Porsche 996/997 GT3 Cup | Full View Carbon Fiber Curved Mirror Large 16" | Full View Carbon Fiber Curved Mirror Large 20" |
Porsche Motorsports has made the decision to discontinue the Cup dash and center gauge panels. Demon Speed has created a new panel which replicates the original as closely as possible both with material and graphics. Whether you have a damaged... | Great looking and functional | Great looking and functional |
$130.00 | $299.00 | $369.00 |
|
|
|
| Hirschmann Rod Ends SMXCP Male Metric Sizes | Hood Pin - Porsche GT3 Cup 996/997.1 | Hood Pin Disc - Porsche GT3 Cup 996/997/991 |
Factory Porsche Rod Ends in various Sizes. | Hood pin for 993, 996 and 997.1 Cup 993.511.541.70 | Hood Pin disk for hood or deck lid 991.151.154.38 |
$78.00 | $11.50 | $9.00 |
|
|
|
| Nitrogen Hose and Fittings for Air Jacks | Nitrogen Transfer Hose and Gauge | Porsche 991 Cup Car Cover | Outdoor | Large Wing |
This is the hose and fitting you need to run from your regulator to your air wand or lance for the air jack system. | With this setup, you are able to maintain a smaller nitrogen bottle for the airjacks and tires while keeping a larger bottle remote. | Rubberized finish with soft cotton finish on the backside. |
$210.00 | $198.00 | $295.00 |
|
|
|
| Porsche Cup Fuel Pump Out Hose 996 | 997.1 | Porsche GT3 Cup Long Distance Sleeves | Porsche GT3 Cup Small Distance Sleeves |
This is the fuel pump out hose for the 996 and 997.1 cup cars. It is new old stock and never used.
Porsche part number 996.110.355.90 | Long Distance Sleeve. Replacement for part number 997.331.575.9A Item 33 | Small Distance Sleeve. Replacement for part number 997.331.573.9A Item 34 |
$200.00 | $15.00 | $10.00 |
|
|
|
| Retractable Tow Hook 996 and 997 Cup Front or Rear | Shock Adjusting Hook Wrench Tool | 75mm and 65mm | Pair | Staubli Lance Swivel only |
Demon Speed Motorsports has created a replacement for the factory racing spring-retractable tow hook found on the 996 and 997 cup cars. | DSM tool for adjusting the shock collars for 996, 997 and 991 Cup Cars These are the tools needed to adjust the collars of the Sachs shocks. The OD of the collars that these are made to adjust are 65mm and 75mm. The tools are made from stainless steel. | Air jack lance swivel for the 997 cup cars. |
$150.00 | $100.00 | $236.00 |
|
|
|
| Staubli Socket (Lance with swivel) G3/8, Air Jack | Staubli Socket (Lance without swivel) G3/8, Air Jack | Steering Wheel - 997 Cup |
Air jack lance for the 997 cup cars. With swivel | Air jack lance for the 997 cup cars. | Original wheel for the 997 Cup Car. Reference 997.347.084.90. |
$819.50 | $612.00 | $396.00 |
| ||
| Travel Hold Down Wheel Washer - Porsche GT3 Cup 996/997.1 | ||
Carbon Steel Zinc Plated Sold as each | ||
$115.00 | ||
