Fittings / Misc
|
|
|
| BBS Motorsports Wheel Bolts and Washers - 24 pc set | BBS Motorsports Wheel Seal O-Ring | Dash and Center Switch Panel - Porsche 996/997 GT3 Cup |
996 or 997 cup 24 bolt wheel hardware | 996 or 997 cup 24 bolt wheel sealing ring | Porsche Motorsports has made the decision to discontinue the Cup dash and center gauge panels. Demon Speed has created a new panel which replicates the original as closely as possible both with material and graphics. Whether you have a damaged... |
$21.95 | $31.00 | $130.00 |
|
|
|
| Full View Carbon Fiber Curved Mirror Large 16" | Full View Carbon Fiber Curved Mirror Large 20" | Hirschmann Rod Ends SMXCP Male Metric Sizes |
Great looking and functional | Great looking and functional | Factory Porsche Rod Ends in various Sizes. |
$299.00 | $369.00 | $78.00 |
|
|
|
| Hood Pin - Porsche GT3 Cup 996/997.1 | Hood Pin Disc - Porsche GT3 Cup 996/997/991 | Lifeline Racing Rain Light With flashing mode |
Hood pin for 993, 996 and 997.1 Cup 993.511.541.70 | Hood Pin disk for hood or deck lid 991.151.154.38 | Flashing mode for AER and other series that require a rain light |
$11.50 | $9.00 | $199.95 |
|
|
|
| Momo Mod7 996 Cup Steering Wheel | Nitrogen Transfer Hose and Gauge | Porsche Cup Fuel Pump Out Hose 996 | 997.1 |
Momo Mod7 Steering Wheel - The original and the best for the Cup Car | With this setup, you are able to maintain a smaller nitrogen bottle for the airjacks and tires while keeping a larger bottle remote. | This is the fuel pump out hose for the 996 and 997.1 cup cars. It is new old stock and never used.
Porsche part number 996.110.355.90 |
$325.00 | $198.00 | $200.00 |
|
|
|
| Quick-Release Steering Wheel Hub | Krontec | Retractable Tow Hook 996 and 997 Cup Front or Rear | Shock Adjusting Hook Wrench Tool | 75mm and 65mm | Pair |
Quick-Release Steering Wheel Hub For use with many adapters and steering wheels | Demon Speed Motorsports has created a replacement for the factory racing spring-retractable tow hook found on the 996 and 997 cup cars. | DSM tool for adjusting the shock collars for 996, 997 and 991 Cup Cars These are the tools needed to adjust the collars of the Sachs shocks. The OD of the collars that these are made to adjust are 65mm and 75mm. The tools are made from stainless steel. |
$529.00 | $150.00 | $100.00 |
|
| |
| Travel Hold Down Wheel Washer - Porsche GT3 Cup 996/997.1 | Quick Disconnects - Porsche GT3 Cup 996 | |
Carbon Steel Zinc Plated Sold as each | CPC Quick Disconnect. This quick connect is used on the Radiator & Trnsmission cooling loops. Carry a spare! Fits: All 996 GT3 Cup cars | |
$115.00 | $28.00 | |
