997.2 Cup
|
|
|
| 3.0" Wheel Outer - BBS Motorsports - NEW | 8" Wheel Inner - BBS Motorsports - New | 9" Wheel Inner - BBS Motorsports - NEW |
3.0" Wide BBW Motorsports Wheel Outer 18" 24 Bolt | 8" Wide BBW Motorsports Wheel Inner 18" 24 Bolt
| 9" Wide BBW Motorsports Wheel Inner 18" 24 Bolt |
$260.00 | $430.00 | $490.00 |
|
|
|
| BBS Motorsports Wheel Bolts and Washers - 24 pc set | BBS Motorsports Wheel Seal O-Ring | Demon Speed Rod End Boot |
996 or 997 cup 24 bolt wheel hardware | 996 or 997 cup 24 bolt wheel sealing ring | Rod end boots to protect rod ends from dirt and moisture |
$21.95 | $31.00 | $5.90 |
|
|
|
| Ignition Coil Beru Porsche 991.1 Cup and Others | 9A160210406 | Ignition Coil Porsche 991.2 Cup and Others | 9A160210407 | Porsche 991 Cup Car Cover | Outdoor | Large Wing |
OEM Brand | 9A160210407 2009-12. 2012-16. 2017-19, W/GT3. 3.8 LITER. 911 Turbo. 911, 911 Turbo. 911; w/GT3. 911; w/o GT3. Boxster. Cayman. 2017 - 2020 Porsche 911 GT3 Cup 991.2 | Rubberized finish with soft cotton finish on the backside. |
$64.00 | $72.00 | $295.00 |
|
|
|
| Porsche Cup Fuel Pump Out Hose 991 | Clubsport | 997.2 | Porsche GT3 Cup Wing Endplates 996 - 991 | Rear Sway Bar Cockpit Adjustable Controller Kit - Porsche 997 |
THis is the correct fuel pump out hose to be used with the 997.2, 991, and the Cayman Clubsport. 3 feet of hose with lanyard for quick disconnect. | Carbon Fiber end plates for the original factory wing. Gloss carbon Fiber Sold as a pair. | This kit is made for the 997 Cup Car. |
$295.00 | $80.00 | $945.00 |
|
|
|
| Serpentine Belt | 997 Cup | Wheel Nut Drive Tool | 997.2 Cup | Front Flares - Fender/Bumper Porsche GT3 Cup 997.2 |
Serpentine Belt for the 997 GT3 Cup Fits: 2005-2009 Porsche 997 GT3 Cup | Wheel tool. Correct tool for removing the wheel nuts on the 997.2 center lock wheels Porsche Motorsports part number 996.721.573.9A | PMNA Front Flares - Fender & Bumper Components |
$29.00 | $489.00 | $795.00 |
|
|
|
| Front Brake Ducts / Scoops - Porsche GT3 Cup 997 | Wing Uprights - Porsche GT3 Cup 997 | Spoiler - Porsche 997.2 GT3 Cup |
PMNA Front Splitter 996.505.986.91 Fits: All 996 GT3 Cup | Raises your stock Cup wing to improve the efficency of your wing.
| Porsche Motorsports Front Spoiler - Late 997 GT3 Cup Made for the GT3 Cup, they also fit the GT3 Street cars as well. |
$50.00 | $350.00 | $224.00 |
|
|
|
| Brake Caliper Pad Retaining Bolts - Porsche GT3 996/997 | Ignition Coil Beru 996/997/Boxster/Cayman/Cup | Center Bolt C Clip Porsche GT3 Cup 964-997.2 |
A Demonspeed exclusive! Custom replacement Front Brake Caliper Pad keeper bolts. Sold as a Pair. | OEM Brand | C-Clip for Center Bolt on 964 - 997.2 Cup center lock hub. Porsche Motorsports part number 900.041.041.01 |
$145.00 | $76.00 | $4.00 |
|
|
|
| CSF Radiator - 997 GT3 / 997 Cup Car Set | Stub Axle Central Bolt GT3 Cup 997.2 | Center Lock | Wheel Lug Nut - Centerlock Wheels 997.2 GT3 Cup |
Replaces OEM part# 99710613102,99710613202, and 99610603775 | Cup Centerlock Center Axle Bolt. Fitment - 997.2 | Wheel Lug Nut for the Centerlock Wheel Porsche Motorsports Part Number 997.361.675.9B Fits: 997.2 Cup Cars with Centerlock Wheels |
$1,395.00 | $235.00 | $77.00 |
|
|
|
| Wheel Washer - Centerlock Wheels GT3 Cup 997.2 | 997.2 Air Filter Housing | Porsche GT3 Cup 964 993 996 and 997 Centerlock wheels Lock Pot |
Wheel Washer for the Centerlock Wheel. Fits: 997.2 Cup Cars with Centerlock Wheels Porsche Part Number 997.361.113.9A | 997.2 Cup Air Filter Housing with decal. 997.110.021.95 | Lock Pot for the center of the wheel hub for use with centerlock wheels. This part is for the 964 993 996 and the 997 Cup. Replaces 964.341.675.70 |
$225.00 | $440.00 | $161.00 |
|
|
|
| Dash and Center Switch Panel - Porsche 996/997 GT3 Cup | RSR Style Engine Mount Plate 993/996/997 GT3, Turbo, and Cup | Rear Adjustable Toe Links Non-Pinch Porsche 996/997/986/987 |
Porsche Motorsports has made the decision to discontinue the Cup dash and center gauge panels. Demon Speed has created a new panel which replicates the original as closely as possible both with material and graphics. Whether you have a damaged... | Fits 993 996 GT3, Turbo, Cup 997 GT3, Turbo, Cup | Rear Adjustable Toe Links. Made from Aircraft Grade Aluminum, 3-piece precision Rod Ends with PTFE liners. |
$130.00 | $538.00 | $430.00 |
|
|
|
| Rear Adjustable Toe Links 986 / 996 / 987 / 997 | Front Adjustable Toe Links | 996/997/986/987 | Non-Pinch Style | Porsche 996/997 GT3 Turbo Billet Aluminum Coolant Pipe Fittings |
Motorsports pinch style toe links | Front Adjustable Toe Links. Made from Aircraft Grade Aluminum, 3-piece precision Rod Ends with PTFE liners. | Weld in engine fittings. Full kit with extra fitings for all engine versions |
$565.00 | $374.00 | $225.00 |
