997.1 Cup
|
|
|
| 1" Wheel Outer - BBS Motorsports - New | 2.5" Wheel Outer - BBS Motorsports - NEW | 8" Wheel Inner - BBS Motorsports - New |
1" Wide BBW Motorsports Wheel Outer 18" 24 Bolt | 2.5" Wide BBW Motorsports Wheel Outer 18" 24 Bolt | 8" Wide BBW Motorsports Wheel Inner 18" 24 Bolt
|
$260.00 | $260.00 | $430.00 |
|
|
|
| 8.5" Wheel Inner - BBS Motorsports - NEW | BBS Motorsports Wheel Bolts and Washers - 24 pc set | BBS Motorsports Wheel Seal O-Ring |
8.5" Wide BBW Motorsports Wheel Inner 18" 24 Bolt
| 996 or 997 cup 24 bolt wheel hardware | 996 or 997 cup 24 bolt wheel sealing ring |
$490.00 | $21.95 | $31.00 |
|
|
|
| Demon Speed Rod End Boot | LCA Rubber End GT3 Style Control Arm Inner Section | LCA Rubber End GT3 Style Control Arm Inner Section | Long |
Rod end boots to protect rod ends from dirt and moisture | Inner contol arm section for Porsche GT3. This can also be used along with the Control Arm outer section to replace the one piece arms found on many Porsches. | Inner contol arm section for Porsche GT3. This can also be used along with the Control Arm outer section to replace the one piece arms found on many Porsches. |
$5.90 | $180.00 | $190.00 |
|
|
|
| Lower Control Arm Outer Section | Updated | Forged | Factory | Porsche 991 Cup Car Cover | Outdoor | Large Wing | Porsche GT3 Cup Wing Endplates 996 - 991 |
Outer contol arm section for Porsche GT3. This can also be used along with the Control Arm inner section to replace the one piece arms found on many Porsches. | Rubberized finish with soft cotton finish on the backside. | Carbon Fiber end plates for the original factory wing. Gloss carbon Fiber Sold as a pair. |
$927.00 | $295.00 | $80.00 |
|
|
|
| Serpentine Belt | 997 Cup | Hood Pin Disc - Porsche GT3 Cup 996/997/991 | Rear Sway Bar Cockpit Adjustable Controller Kit - Porsche 997 |
Serpentine Belt for the 997 GT3 Cup Fits: 2005-2009 Porsche 997 GT3 Cup | Hood Pin disk for hood or deck lid 991.151.154.38 | This kit is made for the 997 Cup Car. |
$29.00 | $9.00 | $945.00 |
|
|
|
| Front Flares - Fender/Bumper Porsche GT3 Cup 997.2 | Front Brake Ducts / Scoops - Porsche GT3 Cup 997 | Wing Uprights - Porsche GT3 Cup 997 |
PMNA Front Flares - Fender & Bumper Components | PMNA Front Splitter 996.505.986.91 Fits: All 996 GT3 Cup | Raises your stock Cup wing to improve the efficency of your wing.
|
$795.00 | $50.00 | $350.00 |
|
|
|
| Spoiler - Porsche 997.1 GT3 Cup | Brake Caliper Pad Retaining Bolts - Porsche GT3 996/997 | Center Bolt C Clip Porsche GT3 Cup 964-997.2 |
Porsche Motorsports Front Spoiler - Early 997 GT3 Cup Made for the GT3 Cup, they also fit the GT3 Street cars as well. | A Demonspeed exclusive! Custom replacement Front Brake Caliper Pad keeper bolts. Sold as a Pair. | C-Clip for Center Bolt on 964 - 997.2 Cup center lock hub. Porsche Motorsports part number 900.041.041.01 |
$220.00 | $145.00 | $4.00 |
|
|
|
| CSF Radiator - 997 GT3 / 997 Cup Car Set | Wheel Washer - Centerlock Wheels Porsche GT3 Cup 996 and 997.1 | Rear Bumper - Porsche GT3 Cup 997.1 |
Replaces OEM part# 99710613102,99710613202, and 99610603775 | Wheel Washer for the Motorsports Centerlock Wheel Fits: 964 993 996 and 997.1 Cup Cars with Centerlock Wheels Replaces part number 964.361.113.70 | 997.1 GT3 Cup Rear composite Bumper Excellent Reproduction! In STOCK! STORE WILL NOT CALCULATE FREIGHT |
$1,395.00 | $112.00 | $900.00 |
|
|
|
| Motorsports Style Centerlock Conversion Package 996/997/986/987 | Porsche GT3 Cup 964 993 996 and 997 Centerlock wheels Lock Pot | Dash and Center Switch Panel - Porsche 996/997 GT3 Cup |
Full 996 / 997.1 style center lock conversion package. | Lock Pot for the center of the wheel hub for use with centerlock wheels. This part is for the 964 993 996 and the 997 Cup. Replaces 964.341.675.70 | Porsche Motorsports has made the decision to discontinue the Cup dash and center gauge panels. Demon Speed has created a new panel which replicates the original as closely as possible both with material and graphics. Whether you have a damaged... |
$2,924.00 | $161.00 | $130.00 |
|
|
|
| RSR Style Engine Mount Plate 993/996/997 GT3, Turbo, and Cup | Hood Pin - Porsche GT3 Cup 996/997.1 | Rear Adjustable Toe Links Non-Pinch Porsche 996/997/986/987 |
Fits 993 996 GT3, Turbo, Cup 997 GT3, Turbo, Cup | Hood pin for 993, 996 and 997.1 Cup 993.511.541.70 | Rear Adjustable Toe Links. Made from Aircraft Grade Aluminum, 3-piece precision Rod Ends with PTFE liners. |
$538.00 | $11.50 | $430.00 |
|
|
|
| Rear Adjustable Toe Links 986 / 996 / 987 / 997 | Travel Hold Down Wheel Washer - Porsche GT3 Cup 996/997.1 | Front Adjustable Toe Links | 996/997/986/987 | Non-Pinch Style |
Motorsports pinch style toe links | Carbon Steel Zinc Plated Sold as each | Front Adjustable Toe Links. Made from Aircraft Grade Aluminum, 3-piece precision Rod Ends with PTFE liners. |
$565.00 | $115.00 | $374.00 |
|
|
|
| Porsche 996/997 GT3 Turbo Billet Aluminum Coolant Pipe Fittings | PORSCHE 2001-2009 996/997 Axle Kit GT3/Turbo Track/Cup Upgrade | Front Splitter - Porsche GT3 Cup 997.1 |
Weld in engine fittings. Full kit with extra fitings for all engine versions | Demon Speed Exclusive High Speed Axles for racing and track. Created specifically for the rigors of the race track. | Joe Toth Composites 997.1 Cup splitter Fits 2005 through 2009 |
$225.00 | $3,249.00 | $440.00 |
| ||
| Dive Planes - Porsche GT3 997 | ||
Joe Toth Composites 997 GT3 Dive Planes. | ||
$174.00 | ||
